QM BT
BBC Pumps QM IT Single-phase electronic starter with level control
Characteristics
- N° 1 facility for wiring in a pump controller (float switch, pressure switch, etc.);
- N° 3 facilities for wiring in level probes (2 with timed, automatic reset) that can also be used with one or two float switches.
- Dimensions: 190x140x70 mm.
P2 BPA2 P2 BPTA2
BBC Pumps P2 BPA2 Direct on line starters for 2 single-phase electric pumps
P2 BPTA2 - Direct on line starters for 2 three-phase electric pumps
Characteristics
- N° 3 facilities for wiring in a start - stop alternate-duty-assist float switch, pressure switch, etc.;
- N° 1 facility for wiring in an alarm device;
- N° 1 Volt-free facility for alarm device.
- Dimensions: 300x380x120 mm.
AM AT
BBC Pumps AM AT Direct-on-line starters for single and three-phase electric pumps
Characteristics
- N° 1 facility for wiring in a pump controller (float switch, pressure switch, etc.);
- N° 3 facilities for wiring in level probes (2 with timed, automatic reset) that can also be used with 1 or 2 float switches.
- Dimensions: 220x300x120 mm.
ATRS
BBC Pumps ATRS Three-phase Soft Starters
Characteristics
- N° 1 facility for wiring in a pump controller (float switch, pressure switch, etc.);
- N° 2 facilities for wiring in start - stop float switches;
- N° 3 facilities for wiring in level probes.
- Dimensions:
ATRS 10 300x400x200 mm;
from ATRS 20 to ATRS 35 400x600x250 mm;
from ATRS 40 to ATRS 60 500x700x250 mm;
ATRS 75 600x800x300 mm.
ATI
BBC Pumps ATI Three-phase Inverter starters
Characteristics
- N° 2 facilities for wiring in a run device (float switch, pressure switch, etc.);
- N° 2 facilities for wiring in start – stop float switches;
- N° 1 facility for wiring in a pressure trasducer 4÷20 mA 0÷10 bar.
-Dimensions:
ATI 230 10, ATI 230 20, ATI 400 10,
ATI 400 20, ATI 400 30
300x400x200 mm;
ATI 230 30, from ATI 400 40 to ATI 400 100
400x600x250 mm.
ATS
BBC Pumps ATS Direct on line three-phase starters for electric pumps Semisom/80
Characteristics
- N° 1 facility for wiring in the humidity probe of the first chamber;
- N° 1 facility for motor overheating;
- N° 1 facility for wiring in a pump controller (float switch, pressure switch, etc);
- N° 2 facilities for wiring in start - stop float switches;
- N° 1 facility for maximum level alarm device;
- N° 1 facility for 24 V AC alarm device.
- Dimensions: 300x400x150 mm.
AT2S
BBC Pumps AT2S Direct on line three-phase starters for 2 electric pumps Semisom/80
Characteristics
- N° 2 facilities for wiring in the humidity probe of the first chamber;
- N° 2 facilities for motor overheating;
- N° 3 facilities for wiring in a start - stop alternate-duty-assist float switch, pressure switch, etc.;
- N° 1 facility for maximum level alarm device;
- N° 1 facility for Volt-free alarm device.
- Dimensions: 400x600x200 mm.