BBC Semisom_1600/80T

Electric submersible pumps for installations in civil and industrial environments.
Suitable to convey dirty, waste and sewage water also containing suspended solids whose size is up to 74 mm.
They are recommended to transfer water, to drain tanks or flooded areas, to pump water coming from civil and industrial
installations as well as the drainage of septic tanks.

CHARACTERISTICS
Semisom 1600/80T
IP rating IP68
Duty (versions 1~230V - 3~400V) Continuous S1
Maximum immersion depth (m) 20
Maximum number of starts per hour 30
Maximum temperature of the liquid pumped versions 1~230V - 3~400V (°C) 50
PH of the liquid pumped 6 - 10
Density of the liquid pumped (kg/dm3) <1,1
Suitable for inverter drive

CONSTRUCTION
Three-phase, asynchronous. Coolant-filled electric rewindable motor with short circuit rotor. Insulation class F.
Winding with phase insulators to protect the motor from power peaks, as a guarantee of a highly reliable product.
Micro thermostat to protect the motor from overheating to be wired to the protection and control panel
Probe to detect water ingress in the oil chamber between the two mechanical seals to be wired to the protection/control panel
Resin-insulated cable kit to prevent penetration of water inside the motor
Double seal with interposed oil chamber

MATERIALS
Tie rods, handle, motor casing, bolts and nuts Stainless Steel AISI304
Shaft, Stainless Steel AISI420B
Cover and volute, cast iron EN GJL-250
Impeller, cast iron EN GJL-200
Feet, Stainless Steel AISI304
Lower mechanical seal, Silicon carbide and alumina