Application
- To pump water from reservoirs or collecting tanks;
- To pressurize civil plants;
- Irrigation;
- To feed boilers.
Application features
- Maximum number of starts per hour 20;
- Maximum temperature of the
water pumped 40 ºC;
- Continuous duty S1;
- Degree of protection IP 55;
- Insulation class F.
Construction
Asynchronous motor with short circuit rotor;
External ventilation.
Suction body and outlet Mechanical cast iron EN GJL-200
Pump casing, tie rods, bolts and nuts Stainless steel AISI304
Shaft Stainless steel AISI420
Impellers Stainless steel AISI304
Diffusers Polymer reinforced with fibre-glass
Mechanical seal Graphite and ceramics
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by 2/3 day courier Free of charge, next working day courier is available for additional cost. If order is placed before 1.30pm. ie despatched on Monday for Wednesday delivery. If placed after 1.30pm then the goods will be despatched Tuesday for Thursday delivery. Next working day cut off time is also 1-30pm. (Highlands and offshore deliveries differ.)